Offering enhanced wireless performance and total network protection, the D-Link RangeBooster G Router (WBR-2310) is the ideal choice for creating a fast and secure wireless home network. * Maximum wireless signal rate derived from IEEE Standard 802.11b/g specifications.
With the reset button. Locate the reset button on the back off the router. While the unit is powered on, press the reset button with a sharp object (e.g. Paperclip). Hold the button pressed for 10 seconds, then release.
View and Download D-Link RangeBooster G WBR-2310 user manual online. D-Link Wireless Router User's Manual. RangeBooster G WBR-2310 Wireless Router pdf manual download. The D-Link WBR-2310 wireless router employs five cutting-edge hardware-based. Note: Make sure to remove your PPPoE software from your computer.
The unit will reboot by itself and once the WLAN light stops blinking the factory reset is done. You can now setup your router again through the user interface The 30-30-30 reset If the above instructions don't work you can always try the 30-30-30 reset as follows:. When router is powered on, press the reset button and hold for 30 seconds. (Use a paper clip or something sharp).
While holding the reset button pressed, unplug the power of the router and hold the reset button for 30 seconds. While still holding the reset button down, turn on the power to the unit again and hold for another 30 seconds. This process usually works for resetting any router to it's factory setting. If that doesn't work be sure to check out the incase someone else has had similar problems resetting their router. Note: It is worth reading more about and what the risks and considerations are when resetting your router this way, instead of just rebooting it. How to login to the WBR-2310 rev B1 To login to the WBR-2310 rev B1 router and change the settings, you can follow these steps:. Make sure you are connected to the router's network, either by Wi-Fi or ethernet cable.
Open your browser and visit. You should be prompted with a login dialogue. Enter the username: admin and if it requires a password, leave it empty or try with admin/ password Note: If you have already changed the password use that instead. You will now be logged in. If you haven't yet changed the defaul password, we recommend that you change it first thing you do after logging in. If these instructions don't work for your router, you can always try a factory reset to get the default, or try some other common, as they can usually be shared across models/variants.
D-link Wbr-2310 Driver For Mac Download
Wbr 2310 Manual
Read the manual. Watch the video. The basics are. Plug the router into the modem. Plug the Mac in via an ethernet cable. The router will have a default address, likely 192.168.1.1 or 192.168.1.0. Open Safari, and type and the router should come up.
D-link Wbr-2310 Driver For Mac
The manual will tell you the default password and username if there is one. Once into the router, you have do some setup depending on if you are using the wireless or not. What security options to use. Also you may need to setup you Mac to use DHCP which it likely already is unless you changed it. Read the manual.